Tube-In is Non-invasive
Lining of water mains is very often associated with problems. Roads are closed, parks destroyed and annoying breaks in water services occur. By using Tube-In you eliminate most of these problems. In one day you may cover up to 500 meters and the consumers will probabaly not notice anything except cleaner water.

We Fit In
Tube -In is a hose relining system with a wall thickness of only 3mm. The different sizes have been developed to fit most materials. In many cases more than 95% of the original diameter is maintained. This means minimal loss of capacity in your main systems.

Tube-Ins strength is independant of the old pipes taking all of the internal pressure (up to 30 bar). In this way it is possible to use a hose of smaller diameter tat the old pipe. If capacity is not a problem this can offer considerable cost savings.

The hose is very flexible and can therefore be used to line through tight radius bends and, when inflated, deforms to take up the shape of the bends.

The Seal of Approval
Tube-In has the approvals that tell you others think as highly of our products as we do.
WRC(england) - Dept of Environment(england) - DOW Chemicals - DVGW - KANTONALES - KIWA